INJECTION MOULDING – These Machines are very versatile and used with Various Materials and various Applications from House hold to Engineering Products.

EXTRUSION MOULDING – These Machines are applicable for Larger Diameter HDPE Fittings used in Sewerage such as STUB FLANGE, REDUCER, ELBOW, TEE AND CROSS.

Technical Specifications for Injection Moulding

TECHNICAL SPECIFICATIONS FOR UPVC / CPVC FITTINGS
Injection Unit UNIT IE-125 IE-150 IE-180 IE-250
Screw Diameter mm 40 45 50 45 50 55 45 50 55 55 60 65 55 60 65 60 65 70 60 65 70
Screw L/D Ratio 22.5 20 18 22.5 20 18 22.5 20 18 23 20 18 23 20 18 22.5 21 20 22.5 21 20
Shot Weight CPVC gms 294 372 459 465 574 695 465 574 695 705 839 985 705 839 985 923 ## 1257 923 1084 1257
Injection Pressure bar 2230 1762 1428 2489 2016 1666 2489 2016 1666 2114 1777 1514 2114 1777 1514 2025 1725 1488 2025 1725 1488
Screw Stroke mm 200 250 250 250 250 275 275
Screw Speed RPM 0-100 0-100 0-100 0-72 0-72 0-62 0-62
Clamping Unit
Clamp Force Ton 125 150 180 250
Clamp Stroke mm 380 435 475 540
Tie Bar Distance mm 420X420 470X470 520X520 570X570
Max. Mould Height mm 450 520 560 600
Min. Mould Height mm 160 180 200 200
Ejector stroke mm 140 140 150 150
Ejector Force Ton 5 5 7 7
General
Max. pressure Mpa 16 16 16 16
Pump Motor Kw 13 18.5 18.5 22
Heater Power Kw 8 12.5 14 15.2
Machine Weight Ton 4.3 6 7.2 8.3
L X W X H Mtr 4.6X1.5X2.1 5.1X1.5X2.3 5.7X1.8X2.4 6.2X1.6X2.6
TECHNICAL SPECIFICATIONS FOR PP
Injection Unit UNIT IE-80 IE-100 IE-125 IE-150 IE-180
Screw Diameter mm 25 30 35 32 36 40 40 45 50 45 50 55 55 60 65
Screw L/D Ratio 22.5 20 18 22.5 20 18 22.5 20 18 22.5 20.7 18.8 22.5 20 18
Shot Weight PP gms 56 80 109 98 124 153 203 257 317 321 398 480 528 629 738
Injection Pressure bar 2304 1600 1176 2350 1857 1504 2230 1762 1428 2133 1666 1376 2110 1775 1510
Screw Stroke mm 140 150 200 250 275
Screw Speed RPM 0-213 0-230 0-160 0-180 0-160
Clamping Unit
Clamp Force Ton 80 100 125 150 180
Clamp Stroke mm 310 350 380 435 475
Tie Bar Distance mm 340 x 340 370×370 420X420 470X470 520X520
Max. Mould Height mm 350 380 450 520 560
Min. Mould Height mm 120 150 160 180 200
Ejector stroke mm 90 120 140 140 150
Ejector Force Ton 2.3 3.8 5 5 7
General
Max. pressure Mpa 16 16 16 16 16
Pump Motor Kw 11 13 13 18.5 18.5
Heater Power Kw 5.8 7.5 8 12.5 14
Machine Weight Ton 2.8 3.4 4.3 6 7.2
L X W X H Mtr 4.1 x 1.1 x 1.6 4.3 x 1.3 x 2.0 4.6×1.5×2.1 5.1×1.5×2.3 5.7×1.6×2.4

Specifications of Vertical Injection Moulding Machine

VERTICAL INJECTION MOULDING MACHINE
DESCRIPTION UNIT
SHOT WEIGHT CPVC GM 300 600
Screw Diameter MM 45 55
Screw Stroke MM 250 250
Screw Speed RPM 0-140 0-85
Screw L/D Ratio 20 20
Max. Mould Height MM 300 450
Max. Opening MM 175 175
Clamping Force Kg/Sq.cm. 150 150
Heating Capacity KW 5.5 8.3
Oil Capacity LTR 250 350
Electric Motor HP 15 15

EXTRUSION MOULDING